Signal (usually orange, white, or yellow — PWM pulse, ~1–2ms high every 20ms)
विनिर्देश
ऑपरेटिंग वोल्टेज
4.8–6 V
Stall torque
1.8 kgf·cm at 4.8 V
गति
0.1 s / 60° at 4.8 V
Rotation
≈180°
Control signal
PWM 50 Hz (20 ms period)
Pulse width
≈1 ms (−90°) – 1.5 ms (centre) – 2 ms (+90°)
Dead band
10 µs
Gears
Plastic (nylon)
Weight
9 g
आकार
22.2 × 11.8 × 31 mm
नोट्स
Never power a servo from a microcontroller board’s own onboard 5V regulator. Even one small hobby servo can draw several hundred mA moving, and far more than that — easily 1A+ — when it stalls against a mechanical limit, well past what most boards’ regulators are rated for. Power VCC from a separate 5–6V supply sized for the servo(s), sharing only GND with the microcontroller.
More than one or two servos makes this non-optional: a small servo’s stall current alone can exceed what an Uno’s onboard regulator survives, and that is before adding a second or third servo moving at the same time.
