حاسبة مجانية على الإنترنت

حاسبة قنطرة ويتستون

مثال Vout = 0 V — for balance (Vout = 0), Rx would need to be 1 kΩ

مثال Bridge is currently balanced.

Each half is its own divider, and the output is the difference between their midpoints: $V_{خرج} = V_{ex} \times (\frac{R_{2}}{R_{1} + R_{2}} - \frac{R_{x}}{R_{3} + R_{x}})$

The bridge is balanced — $V_{خرج} = 0$ — when $R_{1} \times R_{x} = R_{2} \times R_{3}$ , so an unknown resistance resolves to $R_{x} = \frac{R_{2} \times R_{3}}{R_{1}}$ . That is how strain gauges, load cells and RTDs are read against three known resistors.

ما تُدخله

Excitation Vex (V)
R1 (Ω)
R2 (Ω)
R3 (Ω)
Rx — unknown/test (Ω)

حاسبات أخرى

حاسبة تركيب المقاوماتتحتاج قيمة لا توفرها سلسلة E. تجد هذه الأداة أقرب مقاومة قياسية، وأفضل تركيب لمقاومتين على التوالي وعلى التوازي من نفس المجموعة.
نسبة المقاومات— or with "Invert" ticked.
تحويل النجمة / المثلثSome networks — a Wheatstone bridge with a load across the middle is the standard one — have no two resistors in plain series or plain parallel, so the…
ثيفينين / نورتنAny linear source, however many parts are inside it, behaves at one pair of terminals exactly like a voltage source behind a series resistance — or, just…
هبوط الجهد في السلك, where for a round trip. The ohms per metre come from the AWG table.
منظم زينر تفرعيA zener holds the output at by swallowing whatever current the load leaves behind, so the series resistor is sized by the worst corner and never by the…
محوّل الجهد المتناوببافتراض موجة جيبية. — —
محوّل خطوة ADCWhat one count is worth, and how counts and volts map onto each other, using the common Arduino-sketch convention where full scale is the top count,…